Synology SA3600

SA3600

Synology SA3600

12 bays
  • 12-core CPU Turbo Boost up to 2.7 GHz
  • Over 5,500 MB/s sequential throughput reading
  • Scale up to 180/96 drives
Add to wishlist
Add to wishlist
Category:

Description

Synology SA3600

Uncompromising performance

Synology SA3600 is a 2U rackmount server with flexible storage scalability and performance. Equipped with a 12-core CPU and high-speed network support, Synology SA3600 delivers sequential throughput at over 5,561 MB/s1. Supporting SAS and SATA drives, SA3600 provides an elastic and expandable storage solution with an optimized total cost of ownership (TCO).

Synology SA3600
  • 1Power button and indicator
  • 2Beep off button
  • 3Drive status indicator
  • 4Drive tray
  • 5Power port
  • 6PSU indicator
  • 7PSU fan
  • 8Console port
  • 91GbE RJ-45 port
  • 1010GbE RJ-45 port
  • 11USB 3.0 port
  • 12PCIe expansion slot
  • 13Expansion port
  • 14Reset button

Synology SA3600 SPECIFICATIONS

CPU

 CPU Model Intel Xeon D-1567
CPU Architecture 64-bit
CPU Frequency 12-core 2.1 (base) / 2.7 (turbo) GHz
Hardware Encryption Engine (AES-NI)

Memory

 System Memory 16 GB DDR4 ECC RDIMM
Memory Module Pre-installed 16 GB (16 GB x 1)
Total Memory Slots 4
Maximum Memory Capacity 128 GB (32 GB x 4)
Notes
  • For more information on memory upgrade limitations,
  • Please select Synology memory modules for optimum compatibility and reliability. Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion.
  • For more information on the recommended memory configurations.
  • Synology reserves the right to replace memory modules with the same or higher frequency based on supplier’s product life cycle status. Rest assured that the compatibility and stability have been strictly verified with the same benchmark to ensure identical performance.

Storage

 Drive Bays 12
Maximum Drive Bays with Expansion Unit 96 (RX1217sas x 7) / 180 (RX2417sas x 7)
Synology SA3600 Compatible Drive Type*
  • 3.5″ SAS HDD
  • 2.5″ SAS HDD
  • 2.5″ SAS SSD
  • 3.5″ SATA HDD
  • 2.5″ SATA HDD
  • 2.5″ SATA SSD
Maximum Single Volume Size*
  • 200 TB (32 GB RAM required, for RAID 5 or RAID 6 groups only)
  • 108 TB
Hot Swappable Drive
Synology SA3600 Notes
  • “Compatible drive type” indicates drives that have been tested to be compatible with Synology products. This term does not indicate the maximum connection speed of each drive bay.
  • Each internal volume (may consist of multiple drives) is expandable up to 108 TB (with memory less than 32 GB) or 200 TB (with memory equal to or greater than 32 GB).

External Ports

 RJ-45 1GbE LAN Port 4 (with Link Aggregation / Failover support)
RJ-45 10GbE LAN Port 2 (with Link Aggregation / Failover support)
USB 3.2 Gen 1 Port* 2
Expansion Port 1
Notes The USB 3.0 standard was renamed to USB 3.2 Gen 1 by the USB Implementers Forum (USB-IF) in 2019.

PCIe

 PCIe Expansion 2 x Gen3 x8 slots (x8 link)

File System

 Internal Drives
  • Btrfs
  • EXT4
Synology SA3600 External Drives
  • Btrfs
  • EXT4
  • EXT3
  • FAT
  • NTFS
  • HFS+
  • exFAT*
Notes exFAT Access is purchased separately in Package Center.

Appearance

 Form Factor (RU) 2U
Size (Height x Width x Depth) 88 mm x 482 mm x 724 mm
Weight 14.5 kg
Rack Installation Support* 4-post 19″ rack (Synology Rail Kit – RKS1317)
Notes The rail kit is sold separately

Others

 System Fan 80 mm x 80 mm x 4 pcs
Fan Speed Mode
  • Full-Speed Mode
  • Cool Mode
  • Quiet Mode
Easy Replacement System Fan
Power Recovery
Noise Level* 49.8 dB(A)
Scheduled Power On / Off
Wake on LAN / WAN
Power Supply Unit / Adapter 500 W
Redundant Power Supply
AC Input Power Voltage 100 V to 240 V AC
Power Frequency 50/60 Hz, Single Phase
Power Consumption* 156.23 W (Access)
72.37 W (HDD Hibernation)
British Thermal Unit 533.08 BTU/hr (Access)
246.94 BTU/hr (HDD Hibernation)
Synology SA3600 Notes
  • Power consumption is measured when it is fully loaded with Western Digital 1TB WD10EFRX hard drive(s).
  • Noise Level Testing Environment: Fully loaded with Seagate 2TB ST2000VN000 hard drive(s) in the idle state. Two G.R.A.S. Type 40AE microphones, each set up 1 meter away from the Synology NAS at the front and rear. Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75˚C; Humidity: 58.2-61.8%

Temperature

 Operating Temperature 0°C to 35°C (32°F to 95°F)
Storage Temperature -20°C to 60°C (-5°F to 140°F)
Relative Humidity 5% to 95% RH

Certification
  • FCC
  • CE
  • BSMI
  • EAC
  • CCC
  • KC
  • VCCI
  • RCM

Warranty

 5 Years
Notes The warranty period starts from the purchase date as stated on your purchase receipt

Environment

 RoHS Compliant

Packaging Content
  • Main Unit X 1
  • Accessory Pack X 1
  • AC Power Cord X 2
  • Quick Installation Guide X 1

Optional Accessories
  • DDR4 ECC RDIMM: D4RD-2666-16G*/D4RD-2666-32G
  • Expansion Units: RX2417sas/RX1217sas
  • 3.5″ SATA HDD: HAT5300
  • 2.5″ SATA SSD: SAT5200
  • M.2 SSD & 10GbE Combo Adapter Card: E10M20-T1
  • M.2 SSD Adapter Card: M2D20
  • 10GbE Network Interface Card: E10G18-T2/E10G18-T1/E10G17-F2
  • Rail Kit Sliding: RKS1317
  • VisualStation: VS960HD/VS360HD
  • Surveillance Device License Pack
Notes It is required to use D4RD-2666-16G with identical memory modules of the same capacity and frequency

Reviews

There are no reviews yet.

Be the first to review “Synology SA3600”

Related products